electrically conductive silver paste adhesive for LED

1 special for low power LED 2 400~500kcps,grey 3 cure at 150 C for 30min 4 silver content: 70%~85% 5 strong strength

Welcome to Dongguan Hongle Chemical 

10years experience in electronic industry,provide professional solution

for you using adhesives and other electronic materials

  

you can get the following:

UV cure adhesive, conductive silver paste, underfill, heat sink compound, electronic  potting compound, bonding glue, RTV silicone sealant & adhesive, COB encapsulant, SMT adhesive, instant adhesive, lubricant, primer, threadlocker...Most of our products have passed tests such as RoHS, Rich, UL, halogen-free etc.

 

we provide conductive silver paste for the following applicaitions:

low power and high power LED and lamp,LCD, IC chip, PCBA , ceramic capacitors, membrane switch, crystal oscillator etc.

 

   WTS-5102 is the newest product with American technology. It is single component electrically conductive silver adhesive, stored at low temperature, with medium viscosity and strong adhesion. It is applied in chips bonding and assembly of Digital tubes, Dot matrix, LED, Bonding, Infrared receiver, Transmitting tubes etc.

Technique Data:

Color: Silver

Silver Content: > 82%

Gravity: 3.21

Viscosity: 8600CPS(23°C/10rpm)

Shore D: 83

Decomposition: 380°C

Glass Transition Temp: 110°C

Shear Strength: >3000psi

Impact Strength: >10Kg/5000psi

Coefficient of thermal expansion: <110°C 40e-6TH,; >110°C 100e- 6TH

Working Temp: -55°Cto 150°C(continuous); -65°C and 300°C (instant)

Thermal Weight Loss: 200°C/0.22%;300°C/0.65%;400°C/2.6%

Volume Resistance: 0.2 mΩ/cm2.

Thermal conductivity: 2.7W/m.k

Cure Condition: @ 150°C 60-90mins

Ammonium Ion: <20ppm

Chloride Ion: <50ppm

Sodium Ion: <5ppm

Potassium Ion: <5ppm

Shelf life: @ 0°C 3 months; @ -15°C 6 months

Note:

1 Place it aside till its temperature is about equal to the room temperature before using

2 Stir properly when being used at room temperature.

3 Do remember to store the product at -15~ -5°C when it is not under use.

The above typical data is what we get at room temperature 25°C only for your reference. But customers should do their test to meets their specific application. We are not to take the reliability for accuracy in applied process because we could not handle the final working conditions. Hereby all is for suggestion not deny.